code reduction whirlpool

multiple resets or errors during a wash cycle it will go into this error code promo technidiscount mode. Possible Causes, solution, sd (Excess suds) appears in display, excessive suds in washer. That means that in the case of failure machine determines a breakage and displays information in a form of the code. Check whether: the drain hose is kinked; the pump / filter are blocked; important: before draining, allow the wash water to cool down.

The washer is taking too long to drain the water out of the tub. Check for plugged or kinked inlet hoses or plugged screens in the inlet valves Verify inlet valve operation - If there is water in the unit: Verify Drain pump operation Pressure Switch Hose is in good condition and properly connected to Tub and - Pressure. Are oneplus promo code water inlet hoses kinked? Possible Causes/Procedure - A power surge may cause this error. F01 No water detected entering machine or pressure switch trip not detected Water level is not reached within a variable time (eeprom parameter) in whirlpool factory test Possible Causes/Procedure - If there is no water in the unit: - Make sure that both valves. Err 03 The start/ pause light and program ready light blinks. Potential Causes Check the drain hose and make sure it is not plugged or kinked Check the electrical connections at the pump and make sure the pump is running. Check Door Lock/Switch Assembly for foreign objects Check Wire Harness connections to the Door Lock/Switch Assembly and Central Control Unit (CCU) Door Lock/Switch Assembly Failure Note: The Door Lock/Switch Assembly can be manually unlocked.